Chinese Version
Home About Us News Products Service Support Shop trading partners  
 
The Omnibus Infrared Remote
All-round remote controller
Versatile Battery
accessory
 
 
 
 
Model Camera external controller DX-SIR

Basic function ¡G9bee3---------------

Suitable Model Common model, detail corresponding table under cover
Cable control model Triple connected head, standard 2.5mm earphone connected head
Control model

No power working mode
M general shutter mode
B(slow-speed) shutter mode
C1 intermittent counting sequence mode

C2 intermittent counting time mode
C3 Reserved taking mode
Infrared ray remote mode

Power source management and power consumption ¡G
Static circuit Static circuit power consumption (DC3.4V, wait 1 minute and test it.) 6 £gA
B Operation mode

Operating current
(1) General setting operation
(2) Luminescence EL power consumption
(3)Infrared ray emission wave form (full function open) above of checking condition which is the operating 3.4V, operating temperature is 25 ¢J

(1) average power consumption is110 £g A
(2)EL starting, the average power consumption is 17.3mA¡Ó5mA
(3) emission average power consumption is 50mA~70mA¡Ó10mA

Operation voltage range

(1) Power source voltage DC 2.4V--3.6V(5V)
(2) Low voltage detection function turn on 2.45V above, the inspection condition of operating temperature is 25 ¢J

(1) Operation function is normal
(2)LCD display the low battery status and need to replace the battery of inaccuracy ¡Ó 0.1V (2.35V~2.55V)

Power source, battery operation effect Standard 1.5V AAA #4 battery, two AAA re-chargeable battery is 1.2 V, two battery of total voltage insufficient of 2.45V. This product working may appear abnormal Continuously working, suggest use durability alkaline battery or oxy-hydrogen battery
Operating temperature, humidity

This product working effect will be changed depend on battery working temperature. Basically, the working condition is 0 ¢J - -45 ¢J (Fahrenheit 32¡X 113F )
¡° Cold, high temperature, high humidity environment can drop down the electronic effect.

Suggest temperature ¡G 15 ¢J - -35 ¢J(Fahrenheit 59¡X 95F ),
Battery working is more stable. This product is not easily shut down. Suggest humidity ¡G below 85 ¢H will not form dew status.

Infrared ray specification ¡G

Infrared ray emit angle

Left and right directional ¡G for receiving emission, the left and right each has around 15 degree included angle ¡G for receiving emission, the up and low of each 15 degree included angle, the reflection object will be interference the receiving angle.

Reflected object can interference received angle.

Infrared ray indoor transmission

Straight line transmission distance is 12 meter (if no signal interference, the power source is around 3V~3.4V. The testing temperature is 25 ¢J )

During indoor transmission, it is interference by light object or reflected object,0 ¡X 12 meter is the standard range.

Infrared ray outdoor transmission

Straight line transmission distance is 5 meter

(under the natural light, the power source is around 3V~3.4V. The testing temperature is 25 ¢J )
During outdoor transmission, the sunlight will directly shining, reflecting to the receiver and will produce noise interference. The ,0 ¡X 5 meter is the standard range.
Monitor function ¡G
Luminescence specification Blue light high frequency driving
LCD panel Fully penetrating LCD monitor, view area is 2.5cm ¡Ñ 3.5cm , the better view angle is 60 degree and the view range is 15 degree----75 degree
Entire structure ¡G
Case material Major material is ABS, rubber, etc

Main body appearance

Length 9.5cm ¡Ñ wide 5.5cm ¡Ñ high 1.3cm (included protruding button 1.5cm )
Main body weight Body weight ¡G around 45gram (included battery weigh 75 gram)
¡ýCharacters¡ýIntroduction¡ýspecification¡ýGuide¡ýHome¡ý